The ECO-Maxi basic drive unit is designed to get the best out of all three processes. Depending on the container chosen, a single drive unit can be used for magnetic polishing, wet grinding or dry polishing. This is done by simply attaching the appropriate interchangeable container. To cater for specific applications, the ECO-Maxi "basic" is available either with three containers "wet", "dry" and "magnetic" or only with the container for magnetic polishing.

Wet grinding obtains perfect results after just 3-4 hours. The use of a special "soft" abrasive medium ensures that the surface of the workpiece does not become hardened – reliably preventing the surface from becoming pitted. The results are the complete removal of any traces of sanding/ grinding and casting and clean, bright workpiece surfaces.

During dry polishing, very fine polishing granulates made from walnut shell ensure a perfect surface finish. Material removal is in the micro range. No damage to diamonds, zirconia or pearls in their settings. Processing time for initial polishing approx. 2-3 hours, for final polishing approx. 30 minutes, giving extremely smooth surfaces and a brilliant shine comparable to that achieved by manual polishing.

standard equipment

  • Speed control via frequency inverter
  • Bayonet fitting for container
  • LCD indicating speed and processing time
  • Automatic container detection
  • 6 l process container for wet finishing including dosing pump and waster water tank
  • 6 l process container for dry finishing
  • 6 l process container for magnetic polishing incl. 200 g rounded stainless steel pins M 4/7 and 1 l compound SC 3

Non-binding contact request