• We customize the process for you.

    You receive a perfectly documented process for each machine.

    Walnut shell granulates

    Walnut shell H 1 granulate impregnated with polishing paste

    This granulate is impregnated with a polishing paste so that no further polishing paste need be added for the first 3 - 4 batches. Typical applications: mirror-finish polishing of precious metals, jewelry, titanium and steel alloys  

    Type Smoothing

    low->high

    Surface

    smooth->high gloss

    Grain Properties Use
    H 1/30 ++ ++++ 4,0 - 6,0 mm Produces high-gloss polished surfaces High-gloss polishing of non-ferrous metals, jewellery, titanium and steel alloys
    H 1/50 +++ ++++ 2,4 - 4,0 mm Produces high-gloss polished surfaces High-gloss polishing of non-ferrous metals, jewellery, titanium and steel alloys
    H 1/100 ++ +++++ 1,7 - 2,4 mm Produces high-gloss polished surfaces High-gloss polishing of non-ferrous metals, jewellery, titanium and steel alloys
    H 1/200 ++ +++++ 1,3 - 1,7 mm Produces high-gloss polished surfaces High-gloss polishing of non-ferrous metals, jewellery, titanium and steel alloys
    H 1/300 + ++++++ 0,8 - 1,3 mm Produces high-gloss polished surfaces High-gloss polishing of non-ferrous metals, jewellery, titanium and steel alloys
    H 1/400 + ++++++ 0,4 - 0,8 mm Produces high-gloss polished surfaces High-gloss polishing of non-ferrous metals, jewellery, titanium and steel alloys
    H 1/500 - +++++++ 0,2 - 0,4 mm Produces high-gloss polished surfaces High-gloss polishing of non-ferrous metals, jewellery, titanium and steel alloys

    Walnut shell granulate H 2 impregnated with grinding paste

    This granulate is impregnated with a grinding paste so that no further grindig paste needs to added for the first three or four batches.

    Type Smoothing

    low->high

    Surface

    smooth->high gloss

    Grain Properties Use
    H 2/30 ++++ +++ 4,0 - 6,0 mm Reduces the 'orange peel' effect on stamped and mouled parts Fine grinding and deburring of stamped non-ferrous metal parts
    H 2/50 +++ +++ 2,4 - 4,0 mm Reduces the 'orange peel' effect on stamped and mouled parts Fine grinding and deburring of stamped non-ferrous metal parts
    H 2/100 ++ ++++ 1,7 - 2,4 mm Reduces the 'orange peel' effect on stamped and mouled parts Fine grinding and deburring of stamped non-ferrous metal parts
    H 2/200 ++ ++++ 1,3 - 1,7 mm Reduces the 'orange peel' effect on stamped and mouled parts Fine grinding and deburring of stamped non-ferrous metal parts
    H 2/300 ++ +++++ 0,8 - 1,3 mm Reduces the 'orange peel' effect on stamped and mouled parts Fine grinding and deburring of stamped non-ferrous metal parts

    Walnut shell granulate H 3 impregnated with PP 01 polishing paste

    This granulate is impregnated with a polishing paste so that no further polishing paste need be added for the first 3 - 4 batches. Typical applications: tungsten carbide, ceramics 

    Type Smoothing

    low->high

    Surface

    smooth->high gloss

    Grain Properties Use
    H 3/400 +++++ +++ 0,4 - 0,8 mm Produces glossy polished surface Smoothing, edge rounding and metals and ceramics

    Walnut shell granulate H 4 impregnated with PP 02 polishing paste

    This granulate is impregnated with a polishing pastr so that no further polishing paste need be added for the first 3 - 4 batches. Typical applicatioins: tungsten carbide, ceramics  

    Type Smoothing

    low->high

    Surface

    smooth->high gloss

    Grain Properties Use
    H 4/400 + +++++++ 0,4 - 0,8 mm Produces high-gloss polished surface Smoothing, edge rounding and polishing hard metals and ceramics
    H 4/500 + +++++++ 0,2 - 0,4 mm Produces high-gloss polished surface Smoothing, edge rounding and polishing hard metals and ceramics
    Contact request

    Non-binding contact request

    Close menu